Syride Manuals
Alti V3 English manual
Alti V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Configure your device
  • V. Advanced configuration
  • VI. Customize your screens
  • VII. Screens when flying
  • VIII. Flight detection and altitude setup
  • IX. Display and delete a flight
  • X. Warnings and reset
  • XI. Transfer your flights
  • XII. Parameters
  • XIII. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

II. Place the instrument

PreviousI. Setup the SYS PC ToolNextIII. Recharging the battery

Last updated 6 months ago

1. Syride suggests to place your instrument on the risers. 2 velcros ables you to place it on any existing riser. Take care not to « lock » your rope or pulley accelerator.This position ables you to manipulate the instrument while flying without releasing the brakes. We recommend you to insert a protection between the velcro and your riser in order to avoid the abrasion of it.

  1. Velcros also allow placing the instrument on a cockpit in thigh (with extension) or on the wrist.

  1. You can secure your instrument by using the strap provided for this purpose.