Syride Manuals
Alti V3 English manual
Alti V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Configure your device
  • V. Advanced configuration
  • VI. Customize your screens
  • VII. Screens when flying
  • VIII. Flight detection and altitude setup
  • IX. Display and delete a flight
  • X. Warnings and reset
  • XI. Transfer your flights
  • XII. Parameters
  • XIII. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

III. Recharging the battery

PreviousII. Place the instrumentNextIV. Configure your device

Last updated 6 months ago

  1. Simply connect your instrument’s USB to a computer.

  1. Your instrument will display “Charging…” and the percentage of charge. To complete, a charge requires 2 hours.

  1. Disconnect USB to stop the charge. Your instrument has a Li-ion battery which has no memory effect.

  1. When your instrument will start, the battery icon needs 10 seconds to be stable.