Syride Manuals
Alti V3 English manual
Alti V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Configure your device
  • V. Advanced configuration
  • VI. Customize your screens
  • VII. Screens when flying
  • VIII. Flight detection and altitude setup
  • IX. Display and delete a flight
  • X. Warnings and reset
  • XI. Transfer your flights
  • XII. Parameters
  • XIII. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

IV. Configure your device

PreviousIII. Recharging the batteryNextV. Advanced configuration

Last updated 6 months ago

  1. Push the central button to start your instrument.

  1. Go to screen #5 with left and right buttons and confirm by clicking on central button. The number of the screen is displayed on the top right of it.

  1. The first screen shows some informations about your instrument.

  1. Next screen ables you to setup the sound volume.

  1. The 2 next screens ables you to setup rising and falling threshold of the vario.

  1. You can turn ON or OFF the backlight of your instrument on the next screen. Warning : backlight reduces the instrument’s autonomy.

  1. Last screen is to go back to main screen (#1).