Syride Manuals
Alti V3 English manual
Alti V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Configure your device
  • V. Advanced configuration
  • VI. Customize your screens
  • VII. Screens when flying
  • VIII. Flight detection and altitude setup
  • IX. Display and delete a flight
  • X. Warnings and reset
  • XI. Transfer your flights
  • XII. Parameters
  • XIII. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

V. Advanced configuration

PreviousIV. Configure your deviceNextVI. Customize your screens

Last updated 6 months ago

Connect your device to a computer with the SYS PC Tool, you get access to advanced setup. You can :

- Adjust the security alarm based on the G-meter.

- Modify the filtering time (integration) of the vario.

- Choose the units and the language of your instrument.

- Change any setup that is changeable inside the instrument.

An explanation of those functions is explained here:

For this :

1) Turn-on the instrument and connect it to your computer

2) From SYS PC Tool, click on “Configure my instrument” icon.

3) Change whatever you want.

4) Click on Send parameters.

https://www.syride.com/en/support