Syride Manuals
Alti V3 English manual
Alti V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Configure your device
  • V. Advanced configuration
  • VI. Customize your screens
  • VII. Screens when flying
  • VIII. Flight detection and altitude setup
  • IX. Display and delete a flight
  • X. Warnings and reset
  • XI. Transfer your flights
  • XII. Parameters
  • XIII. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

VI. Customize your screens

PreviousV. Advanced configurationNextVII. Screens when flying

Last updated 6 months ago

With your Alti, you can fully customize screens 1 and 2!

To customize your screen (tutorial video ) :

1) Go to:

2) Customize your screen by selecting an item with its size and unit, and then drag and drop it to the screen.

3) Download the config file to your computer.

4) Turn-on your instrument, and connect it to your computer with USB.

5) On SYS PC Tool, click on “Send a file to my instrument” icon.

6) Select the config file you just downloaded before and disconnect your instrument, done.

https://www.youtube.com/watch?v=D3lfZWiS13M
http://www.syride.com/en/ssctool/Alti