Syride Manuals
Alti V3 English manual
Alti V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Configure your device
  • V. Advanced configuration
  • VI. Customize your screens
  • VII. Screens when flying
  • VIII. Flight detection and altitude setup
  • IX. Display and delete a flight
  • X. Warnings and reset
  • XI. Transfer your flights
  • XII. Parameters
  • XIII. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

VII. Screens when flying

PreviousVI. Customize your screensNextVIII. Flight detection and altitude setup

Last updated 6 months ago

  1. Screens #1 and #2 shows the informations you previously choosed.

  1. Pressing the central button will turn OFF and ON the sound of the vario. This is usefull when you need to concentrate on a transition or when landing.

1. Screen #3 displays global informations concerning your flight. From top to bottom, these informations are:

o Top altitude

o Min altitude

o Top vario

o Min vario