Syride Manuals
Alti V3 English manual
Alti V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Configure your device
  • V. Advanced configuration
  • VI. Customize your screens
  • VII. Screens when flying
  • VIII. Flight detection and altitude setup
  • IX. Display and delete a flight
  • X. Warnings and reset
  • XI. Transfer your flights
  • XII. Parameters
  • XIII. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

XI. Transfer your flights

PreviousX. Warnings and resetNextXII. Parameters

Last updated 6 months ago

1. Be sure you’ve installed the SYS-PC-Tool software on your computer ()

  1. Turn on and connect your instrument with the USB cable.

  2. Click on Account configuration icon.

  1. Press the “Download recorded flights” icon and your flights will be sent from the instrument to your computer and the online flight book. You can have access to the files on your computer by clicking on File/open local directory.

  1. Go to your profile on the Syride website to visualize your flight (altitude, vario, gmeter, flight time, gain, ...)

  1. If you want, you can edit some informations about your flight (flight name, wing, flight type, etc..) in order to generate detailed statistics.

To use the advanced flight analyzer on syride.com, you must enter your email and password of your Syride account (create one on ) Make sure "Use the advanced logbook from Syride.com” is selected to upload your flights and click “OK”

http://www.syride.com
https://www.syride.com/en/software