> For the complete documentation index, see [llms.txt](https://manuals.syride.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://manuals.syride.com/evo-v1-english-manual/v.-general-ergonomics.md).

# V.	General ergonomics

While the instrument is running, the whole display is dedicated to flight items. In order to make the menus appear, draw a slide-down or slide-up movement with your finger, By applying a slight pressure on the screen:

* The top banner appears during a few seconds by sliding down: 

<figure><img src="/files/rtNO5yTqffL91hGfoX8H" alt=""><figcaption></figcaption></figure>

* Slide left or right in order to go to next or previous flight screen:&#x20;

<figure><img src="/files/XefhIVic5ftdvpP4XGpd" alt=""><figcaption></figcaption></figure>

* Slide UP to display menus:&#x20;

<figure><img src="/files/BRsyPusfE9qjD52aLI94" alt=""><figcaption></figcaption></figure>

For your information:

\-       <mark style="color:red;">**A slight pressure must be applied to use the Evolution touchscreen**</mark>. This technology allows to use  this instrument with gloves,

\-       The take-off is automatically detected and starts the log. The flight time in the top banner appears after take-off,

\-       The touch-screen is designed to be used with or without gloves,

\-       Any flight item that requires GPS needs at least 3 satellites. Otherwise, a “NO GPS” message may show up instead of the item,

\-      <mark style="color:red;">**The first GPS fix can take several minutes in case of long power-off or in case of significant change in position. Any first GPS fix should be done outside. We recommend you to turn ON the instrument a few minutes before taking-off**</mark>,

\-       The temperature only indicates the temperature of the electronics. This cannot be used as a reference for ambient temperature,

\-       A 3.5mm jack socket is available on the right side of the device. Plugging a headset automatically transfers any sound from the speaker to the headset (and cuts-off the speaker).