Syride Manuals
Evo V1 English manual
Evo V1 English manual
  • Foreword
  • I. Setup Syride communication software
  • II. Turn ON and OFF the flight computer
  • III. Charge the battery
  • IV. Place the instrument in flight
  • V. General ergonomics
  • VI. The 3 main menus
  • VII. Parameters : system information
  • VIII. Parameters : Wi-Fi and Bluetooth setup
  • IX. Parameters : online functions
  • X. Parameters : GNSS setup
  • XI. Parameters : flightbook
  • XII. Parameters : advanced parameters (instrument)
  • XIII. Navigation : GOTO menu
  • Navigation : add/edit/delete waypoints menu
  • XV. Navigation : load a route menu
  • XVI. Navigation : add/edit/delete a route menu
  • XVII. Navigation : airspaces menu
  • XVIII. Advanced setup (software)
  • XIX. Customize the flight screen and the vario
  • XX. Transfer your flights
  • XXI. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

X. Parameters : GNSS setup

PreviousIX. Parameters : online functionsNextXI. Parameters : flightbook

Last updated 3 months ago

To reach this page, slide up from any flight screen to make menus appear, then click « Parameters menu » button, then click the « GPS setup » button.

Enabling GNSS is mandatory for track recording and displaying a lot of items (like the Route, the drift, GPS altitude, etc…). Your current GPS position is displayed in the status area on the bottom of the page.

Advanced settings let you know the signal strength of each satellite. The gray bars show the signals received by the Evolution but not used for the calculation. The black bars show a signal used to locate you.

Choose the GNSS you want to use with the Evolution. At most 3 can be activated simultaneously: GPS: Navstar (USA), GAL: Galileo (European), BEI: Beidou (Chinese), QZS: Quasi-Zenith Satellite (Japanese), GLO: Glonass (Russian). The satellite-based augmentation () of the Evolution GNSS chip is active by default.

SBAS