Syride Manuals
Evo V1 English manual
Evo V1 English manual
  • Foreword
  • I. Setup Syride communication software
  • II. Turn ON and OFF the flight computer
  • III. Charge the battery
  • IV. Place the instrument in flight
  • V. General ergonomics
  • VI. The 3 main menus
  • VII. Parameters : system information
  • VIII. Parameters : Wi-Fi and Bluetooth setup
  • IX. Parameters : online functions
  • X. Parameters : GNSS setup
  • XI. Parameters : flightbook
  • XII. Parameters : advanced parameters (instrument)
  • XIII. Navigation : GOTO menu
  • Navigation : add/edit/delete waypoints menu
  • XV. Navigation : load a route menu
  • XVI. Navigation : add/edit/delete a route menu
  • XVII. Navigation : airspaces menu
  • XVIII. Advanced setup (software)
  • XIX. Customize the flight screen and the vario
  • XX. Transfer your flights
  • XXI. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

XVIII. Advanced setup (software)

PreviousXVII. Navigation : airspaces menuNextXIX. Customize the flight screen and the vario

Last updated 3 months ago

Connect your Evolution to the SYS PC Tool in order to get access to advanced options. From these advanced options, you can, for example:

- Change the averaging time of the vario.

- Change the G-force alarm threshold value

- Change airspace pre-violation vertical and horizontal distances.

To access these advanced parameters :

1) Turn-on and connect your Evolution to your computer.

2) On the SYS PC Tool software, click on the “Parameters” icon to open the setting window.

3) Modify any value.

4) Click on « Send parameters ».