Syride Manuals
GPS V3 English manual
GPS V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Configure your device
  • V. Advanced configuration
  • VI. Customize your screens and vario sound
  • VII. Height above ground
  • VIII. Screens when flying
  • IX. Information about GPS state
  • X. Display and delete a flight
  • XI. Warnings and reset
  • XII. Transfer your flights
  • XIII. Parameters
  • XIV. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

IX. Information about GPS state

PreviousVIII. Screens when flyingNextX. Display and delete a flight

Last updated 6 months ago

The GPS fix after a long period of inactivity, or after an important change in geographical position, can take up to 10 minutes. It is recommended to be outdoor in order to ease the first GPS fix. We suggest you to turn ON your instrument a few minutes before taking-off until GPS fixes.

1. GPS state is shown with the bargraph on the top center of the screen :

Blinking = GPS not ready

  1. The plane icon on the top left of the screen indicates wether a flight is beeing recorded or not. The vario automatically detects when you’re flying.

Low level signal

Medium level signal

High level signal

Optimum level signal