Syride Manuals
GPS V3 English manual
GPS V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Configure your device
  • V. Advanced configuration
  • VI. Customize your screens and vario sound
  • VII. Height above ground
  • VIII. Screens when flying
  • IX. Information about GPS state
  • X. Display and delete a flight
  • XI. Warnings and reset
  • XII. Transfer your flights
  • XIII. Parameters
  • XIV. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

V. Advanced configuration

PreviousIV. Configure your deviceNextVI. Customize your screens and vario sound

Last updated 6 months ago

Connect your device to a computer with the SYS PC Tool, you get access to advanced setup. You can :

· Adjust the security alarm based on the G-meter.

· Modify the filtering time (integration) of the vario.

· Choose the units and the language of your instrument.

· Change any setup that is changeable inside the instrument.

An explanation of those functions is explained here:

For this :

1) Turn-on the instrument and connect it to your computer

2) From SYS PC Tool, click on “Configure my instrument” icon.

3) Change whatever you want.

4) Click on Send parameters.

https://www.syride.com/en/support