Nav V3 English manual

Nav V3 English manual

Foreword
I. Setup the SYS PC Tool
II. Place the instrument
III. Recharging the battery
IV. Information about GPS state
V. Menu synoptic
VI. Flight screens
VII. Configure your device
VIII. Advanced configuration
IX. Customize your screens and vario sound
X. Height above ground
XI. Locate airspaces
XII. Navigation
XIII. Display and delete a flight
XIV. Warnings and reset
XV. Transfer your flights
XVI. Parameters
XVII. Suggestion of use
Important Warnings and Safety Instructions

Powered by GitBook

On this page

III. Recharging the battery

PreviousII. Place the instrument NextIV. Information about GPS state

Last updated 5 months ago

Simply connect your instrument with the USB cable to a computer. A red led shows the right loading of the device.

Your instrument will display “Charging…” and the percentage of charge. To complete, a charge requires 2 hours.

Disconnect USB to stop the charge. Your instrument has a Li-ion battery which has no memory effect.
When your instrument will start, the battery icon needs 10 seconds to be stable.