Syride Manuals
Nav V3 English manual
Nav V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Information about GPS state
  • V. Menu synoptic
  • VI. Flight screens
  • VII. Configure your device
  • VIII. Advanced configuration
  • IX. Customize your screens and vario sound
  • X. Height above ground
  • XI. Locate airspaces
  • XII. Navigation
  • XIII. Display and delete a flight
  • XIV. Warnings and reset
  • XV. Transfer your flights
  • XVI. Parameters
  • XVII. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

IV. Information about GPS state

PreviousIII. Recharging the batteryNextV. Menu synoptic

Last updated 5 months ago

The GPS fix after a long period of inactivity, or after an important change in geographical position, can take up to 10 minutes. It is recommended to be outdoor to ease the first GPS adjustment. We suggest you to turn ON your instrument a few minutes before taking-off.

  1. GPS state is shown with the bargraph on the top center of the screen:

Blinking = GPS not ready

  1. The plane icon on the top left of the screen indicates that your NAV is recording your flight. The vario automatically detects when you’re flying.

Low level signal

Medium level signal

High level signal

Optimum level signal

A number indicates the number of synchronized satellites