Syride Manuals
Nav V3 English manual
Nav V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Information about GPS state
  • V. Menu synoptic
  • VI. Flight screens
  • VII. Configure your device
  • VIII. Advanced configuration
  • IX. Customize your screens and vario sound
  • X. Height above ground
  • XI. Locate airspaces
  • XII. Navigation
  • XIII. Display and delete a flight
  • XIV. Warnings and reset
  • XV. Transfer your flights
  • XVI. Parameters
  • XVII. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

IX. Customize your screens and vario sound

PreviousVIII. Advanced configurationNextX. Height above ground

Last updated 5 months ago

With NAV, you can fully customize screens 1 to 4, as well your vario sound!

To customize your screen (tutorial video ):

1) Go to:

2) Customize your screen by selecting an item with is font size and units and then drag and drop it to the screen.

3) Download the config file to your computer.

4) Turn-on your instrument and connect it to your computer.

5) On SYS PC Tool, click on “Send a file to my Instrument” icon.

6) Select the config file you just downloaded before and disconnect your instrument, done.

The vario sound setup follows the same principle, follow here:

https://www.syride.com/en/variosetup
https://www.youtube.com/watch?v=D3lfZWiS13M
http://www.syride.com/en/ssctool/Nav