Syride Manuals
Nav V3 English manual
Nav V3 English manual
  • Foreword
  • I. Setup the SYS PC Tool
  • II. Place the instrument
  • III. Recharging the battery
  • IV. Information about GPS state
  • V. Menu synoptic
  • VI. Flight screens
  • VII. Configure your device
  • VIII. Advanced configuration
  • IX. Customize your screens and vario sound
  • X. Height above ground
  • XI. Locate airspaces
  • XII. Navigation
  • XIII. Display and delete a flight
  • XIV. Warnings and reset
  • XV. Transfer your flights
  • XVI. Parameters
  • XVII. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

VIII. Advanced configuration

PreviousVII. Configure your deviceNextIX. Customize your screens and vario sound

Last updated 5 months ago

Connect your device to a computer with the SYS PC Tool, you get access to advanced setup. You can:

  • Change the airspace « pre-violation » warnings (HAS for Horizontal distance to AirSpace, VAS for Vertical distance to AirSpace).

  • Change any setup that is changeable inside the instrument.

  • Adjust the security alarm based on the G-meter.

An explanation of those functions is explained here:

For this:

1) Turn-on the instrument and connect it to your computer.

2) From SYS PC Tool, click on “Configure my instrument” icon.

3) Change whatever you want.

4) Click on Send parameters.

https://www.syride.com/en/support