Syride Manuals
XL English manual
XL English manual
  • Forewords
  • I. Setup the SYS PC Tool
    • Using a computer:
    • Using a Smartphone:
  • II. Place the instrument
  • III. Charging the battery
  • IV. Status bar
  • V. Menus synoptic
  • VI. Flight screens
  • VII. Configure your device
  • VIII. Advanced configuration
    • Using a computer:
    • Using a Smartphone:
  • IX. Customize your screens and vario sound
    • Using a computer:
    • Using a Smartphone:
  • X. Locate airspaces
  • XI. Navigation
    • Using a computer:
    • Using a Smartphone:
  • XII. Bluetooth features
  • XIII. Display and delete a flight track
  • XIV. Warning and reset
  • XV. Uploading your flights
    • Using a computer
    • Using a Smartphone:
  • XVI. Parameters
  • XVII. Suggestion of use
  • Important Warnings and Safety Instructions
Powered by GitBook
On this page

VI. Flight screens

PreviousV. Menus synopticNextVII. Configure your device

Last updated 6 months ago

  1. Screens 1 to 4 allow you to display the flight information you want. If you're not getting enough GPS signal, a NO GPS indication will appear.

  1. Pressing the main button will turn OFF and ON the sound of the vario. This is useful when you need to concentrate on a transition or a landing.

Pressing on the main button allows you to record your position and obtain the GPS coordinates (useful for recovery!), the distance, the vertical gain, the time that has elapsed since the pointing of this point as well as an indication of the route to follow to return to this position. This is also often used by PPG to quickly save their take-off position.

  1. Screen #5 (MAP screen) displays on the whole LCD area. You can see :

  • Your current position and heading on the middle of the screen

  • The topography grayscaled

  • Airspaces (if previously uploaded to the instrument)

  • Your GPS track for the last 10 minutes

  • Waypoints and optimized navigation route (if a route is loaded)

Pressing the middle button changes the zoom level.